Parweld XTP 63 Three Phase Plasma Cutter
In stock
The variable output of the Parweld XTP 63 makes it ideal for cutting metals up to 20mm thick where the output power can be fine tuned to minimise dross on the cut edges. Infinite power control allows the output to be tuned to minimise dross on the cut edges.
The pilot arc automatically re-ignites enabling easy cutting of mesh or perforated materials. Non HF ignition minimises the risk of interference with electronic systems.
The XTP 63 is able to cope with inputs which fluctuate by +/-10% and can be used with the majority of generators.
The machine is housed in a metal case with carry handle and shoulder strap.
Professional Level Air Plasma Cutter, suitable for industrial manufacturing, metal fabrication, maintenance repair, agricultural and DIY and scrap cutting
Key Features:
- 400V Three Phase
- Lightweight 24kg
- 60A @ 40% Duty Cycle
- Generator friendly
- Ideal for mesh cutting
- 20mm production cut
- 30mm severance cut
- Supplied with XT4000 plasma torch x 6m and 3m earth cable
- Auto over voltage and over current protection
- Includes built in air pressure regulator and pressure gauge
- 3 years return to base warranty
- Manufactured to IP23S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
Specifications
| Parweld XTP 40 Plasma | Technical Data |
| Mains Voltage | 380V 3P |
| Production Cut Capacity | 20mm |
| Severance Cut Capacity | 30mm |
| Starting Method | Short Circuit |
| Output current | 10 A – 60 A |
| Duty cycle at 40 deg ambient temperature | |
| 40 % | 60 A |
| Mains voltage (tolerances) | 380V 3P (± 15% ) |
| Mains frequency | 50/60 Hz |
| Max. connected load | 7 kVA |
| Recommended generator rating | 10 kVA |
| Dimensions (L x W x H mm) | 5.0 kVA |
| Dimensions (L x W x H mm) | 450 × 170 × 310 mm |
| Weight approx. | 13 kg |
